Timeroom: Fall 2021

Displaying 4101 - 4110 of 4247 Results for: All Courses
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (06) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   4  
CRN: 12324
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Only listed majors in section: FOREST TECH
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/5/2021 10/26/2021 T 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (07) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   4  
CRN: 12325
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/28/2021 11/23/2021 R 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (08) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   4  
CRN: 12326
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIOR in Fall 2021.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/29/2021 11/19/2021 F 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (09) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   4  
CRN: 12369
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/29/2021 11/19/2021 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (10) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   4  
CRN: 13123
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 697 (01) - CEPS Industrial Experience

CEPS Industrial Experience

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   10  
CRN: 13394
Students in the CEPS Industrial Experience must register for TECH 697 during each semester (fall and/or spring) in which they are participating in their industrial work experience. Student in the minor must get permission from the minor advisor in order to register for this course.
You must sign up in the Dept Office before registering through WEBCAT.
Repeat Rule: May be repeated for a maximum of 2 credits.
Equivalent(s): TECH 797
Only listed colleges in section: Engineering&Physical Sciences
Classes not allowed in section: Freshman
Instructors: Stephanie Whitney, Brad Kinsey
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged OFFCMP TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 697 (02) - CEPS Industrial Experience

CEPS Industrial Experience

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   10  
CRN: 13873
Students in the CEPS Industrial Experience must register for TECH 697 during each semester (fall and/or spring) in which they are participating in their industrial work experience. Student in the minor must get permission from the minor advisor in order to register for this course.
Section Comments: This section is intended for students who will not be utilizing campus supports and facilities while completing your experience.
You must sign up in the Dept Office before registering through WEBCAT.
Repeat Rule: May be repeated for a maximum of 2 credits.
Equivalent(s): TECH 797
Only listed colleges in section: Engineering&Physical Sciences
Classes not allowed in section: Freshman
Instructors: Stephanie Whitney, Brad Kinsey
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged OFFCMP TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 750 (01) - Intellectual Asset Management for Engineers and Scientists

Intellectual Asset Management

Credits: 4.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   25  
CRN: 12832
This course provides an introduction to the most important topic in the 21 century--intellectual assets. Students will receive an overview in practical, real-world aspects of managing intellectual assets (copyright, patents, trademarks, trade secrets, etc.). Students taking this course will be exposed to lectures, guest presentations, and case studies aimed at increasing their understanding of intellectual property strategies and related legal issues; technology assessment; technology valuation; licensing issues, strategies and negotiation techniques; business planning and start-up company development; and strategies for attracting investment for new ideas. The instructors and guest speakers for the course are involved in managing, protecting, investing in, or commercializing intellectual property assets in real world settings such as university technology transfer offices, patent law firms, venture capital firms, start-up companies, and related settings.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Matthew Simon
Start Date End Date Days Time Location
8/30/2021 12/13/2021 T 5:10pm - 8:00pm PARS N116
Durham   Engineering&Physical Sciences :: Technology

TECH 797 (01) - Undergraduate Ocean Research Project

Undergrad Ocean Research Prog

Credits: 2.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   27  
CRN: 10191
Students work as members of interdisciplinary project teams on contemporary ocean-related problems under the guidance of a faculty adviser. Student team defines problem, prepares a budget, conducts literature surveys, engages in dialogue with experts in the community, deals with vendors, designs, and builds a working engineering model, gathers and analyzes scientific data or conducts a comprehensive study, makes interim reports, and defends the results before a jury of experts. Prereq: normally senior standing and permission of the program director. A yearlong effort: 2 credits each semester, 4 credits total, an IA (continuous course) grade given at the end of the first semester. Writing intensive.
Repeat Rule: May be repeated up to 1 times.
Equivalent(s): TECH 697
Attributes: Writing Intensive Course
Start Date End Date Days Time Location
8/30/2021 12/13/2021 R 12:40pm - 2:00pm CHASE 105
Durham   Engineering&Physical Sciences :: Technology

TECH 850 (01) - Intellectual Asset Management for Engineers and Scientists

Intellectual Asset Management

Credits: 3.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Class Size:   5  
CRN: 13843
This course provides an introduction to the most important topic for business in the 21st century--intellectual assets. Students receive an overview in practical, real-world aspects of managing intellectual assets (copyright, patents, trademarks, trade secrets, etc.). Students taking this course will be exposed to lectures, guest presentations, and case studies aimed at increasing their understanding of intellectual property strategies and related legal issues; technology assessment; technology valuation; licensing issues, strategies and negotiation techniques; business planning and start-up company development; and strategies for attracting investment for new ideas. The instructors and guest speakers for the course are involved in managing, protecting, investing in, or commercializing intellectual property assets in real world settings such as university technology transfer offices, patent law firms, venture capital firms, start-up companies, and related settings.
You must sign up in the Dept Office before registering through WEBCAT.
Instructors: Matthew Simon
Start Date End Date Days Time Location
8/30/2021 12/13/2021 T 5:10pm - 8:00pm PARS N116