Timeroom: Fall 2020

Displaying 1 - 10 of 47 Results for: Subject = ME
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 441 (01) - Introduction to Engineering Design and Solid Modeling

Intro Eng Design & Solid Model

Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 10530
Why are some products better than others? What is the definition of "better"? This course uses an inquiry-guided approach to explore the product design process via team design projects and laboratory exercises. Everyday products are examined from historical, societal, design, safety and manufacturing perspectives. Topics include ideation, sketching, design constraints, solid modeling, decision making, statistical quality control, manufacturing methods and engineering analysis. Students develop an appreciation for good design and the ability to communicate design ideas via 3-D solid models, written and oral reports. Prereq: MATH 418 or equivalent.
You must sign up in the Dept Office before registering through WEBCAT.
Only listed colleges in section: Engineering&Physical Sciences
Only listed majors in section: MECHANICAL ENGR, UNDECLARED EPS
Attributes: Writing Intensive Course, Inquiry (Discovery)
Instructors: Alireza Ebadi
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 11:10am - 12:00pm HS 210
8/31/2020 12/11/2020 M 2:10pm - 4:00pm KING W114
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 441 (02) - Introduction to Engineering Design and Solid Modeling

Intro Eng Design & Solid Model

Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 12696
Why are some products better than others? What is the definition of "better"? This course uses an inquiry-guided approach to explore the product design process via team design projects and laboratory exercises. Everyday products are examined from historical, societal, design, safety and manufacturing perspectives. Topics include ideation, sketching, design constraints, solid modeling, decision making, statistical quality control, manufacturing methods and engineering analysis. Students develop an appreciation for good design and the ability to communicate design ideas via 3-D solid models, written and oral reports. Prereq: MATH 418 or equivalent.
You must sign up in the Dept Office before registering through WEBCAT.
Only listed colleges in section: Engineering&Physical Sciences
Only listed majors in section: MECHANICAL ENGR, UNDECLARED EPS
Attributes: Writing Intensive Course, Inquiry (Discovery)
Instructors: Alireza Ebadi
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 11:10am - 12:00pm HS 210
8/31/2020 12/11/2020 W 2:10pm - 4:00pm KING W114
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 477 (1SY) - Introduction to Solid Modeling

Introduction to Solid Modeling

Course Delivery Method: Scheduled meeting time, Online (no campus visits), EUNH
Credits: 1.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   40  
CRN: 13065
Introduction to solid modeling and engineering drawings using computer-aided design software. For Mechanical Engineering students, this course can only be taken with permission as an alternative to the required ME 441 Introduction to Engineering Design and Solid Modeling for students with extensive engineering design experience (e.g., high school or another university course), an engineering project based program (e.g., FIRST Robotics or Project Lead the Way), or similar experience (e.g., working in the industry). Students should not take both ME 441 and ME 477. Lecture and Lab.
You must sign up in the Dept Office before registering through WEBCAT.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman, Sophomore
Only listed majors in section: MECHANICAL ENGR, OCEAN ENGR, UNDECLARED EPS
Instructors: Alireza Ebadi
Start Date End Date Days Time Location
8/31/2020 12/11/2020 F 11:10am - 12:00pm ONLINE
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 503 (01) - Thermodynamics

Thermodynamics

Credits: 3.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   40  
CRN: 13201
Properties of a pure substance, work and heat, laws of thermodynamics, entropy, thermodynamic relations, cycles. Prereq: PHYS 407. Pre- or Coreq: CHEM 405; MATH 528.
You must sign up in the Dept Office before registering through WEBCAT.
Instructors: Gregory Chini
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MW 3:40pm - 5:00pm MCC 240
8/31/2020 12/11/2020 T 11:10am - 12:00pm HORT 210
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 525 (01) - Statics

Statics

Course Delivery Method: Rotational Attendance
Can be taken by students who are remote.
Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 10704
Introduces statics. Two- and three-dimensional force systems, the concept of equilibrium, analysis of trusses and frames, centroids, bending moment and shear force diagrams, and friction. Prereq: PHYS 407 and MATH 426.
You must sign up in the Dept Office before registering through WEBCAT.
Equivalent(s): CEE 500, CIE 525, CIE 528
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 9:10am - 10:00am MURK 115
8/31/2020 12/11/2020 F 3:10pm - 4:30pm KING S145
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 525 (02) - Statics

Statics

Course Delivery Method: Rotational Attendance
Can be taken by students who are remote.
Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 11483
Introduces statics. Two- and three-dimensional force systems, the concept of equilibrium, analysis of trusses and frames, centroids, bending moment and shear force diagrams, and friction. Prereq: PHYS 407 and MATH 426.
You must sign up in the Dept Office before registering through WEBCAT.
Equivalent(s): CEE 500, CIE 525, CIE 528
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 9:10am - 10:00am MURK 115
8/31/2020 12/11/2020 F 3:10pm - 4:30pm KING S145
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 525 (03) - Statics

Statics

Course Delivery Method: Rotational Attendance
Can be taken by students who are remote.
Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 11484
Introduces statics. Two- and three-dimensional force systems, the concept of equilibrium, analysis of trusses and frames, centroids, bending moment and shear force diagrams, and friction. Prereq: PHYS 407 and MATH 426.
You must sign up in the Dept Office before registering through WEBCAT.
Equivalent(s): CEE 500, CIE 525, CIE 528
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 9:10am - 10:00am MURK 115
8/31/2020 12/11/2020 W 5:40pm - 7:00pm KING N101
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 525 (04) - Statics

Statics

Course Delivery Method: Rotational Attendance
Can be taken by students who are remote.
Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 11485
Introduces statics. Two- and three-dimensional force systems, the concept of equilibrium, analysis of trusses and frames, centroids, bending moment and shear force diagrams, and friction. Prereq: PHYS 407 and MATH 426.
You must sign up in the Dept Office before registering through WEBCAT.
Equivalent(s): CEE 500, CIE 525, CIE 528
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 9:10am - 10:00am MURK 115
8/31/2020 12/11/2020 W 5:40pm - 7:00pm KING S145
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 525 (05) - Statics

Statics

Course Delivery Method: Rotational Attendance
Can be taken by students who are remote.
Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 13203
Introduces statics. Two- and three-dimensional force systems, the concept of equilibrium, analysis of trusses and frames, centroids, bending moment and shear force diagrams, and friction. Prereq: PHYS 407 and MATH 426.
You must sign up in the Dept Office before registering through WEBCAT.
Equivalent(s): CEE 500, CIE 525, CIE 528
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 9:10am - 10:00am MURK 115
8/31/2020 12/11/2020 W 3:40pm - 5:00pm SLS 120
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 525 (06) - Statics

Statics

Course Delivery Method: Rotational Attendance
Can be taken by students who are remote.
Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Class Size:   25  
CRN: 13204
Introduces statics. Two- and three-dimensional force systems, the concept of equilibrium, analysis of trusses and frames, centroids, bending moment and shear force diagrams, and friction. Prereq: PHYS 407 and MATH 426.
You must sign up in the Dept Office before registering through WEBCAT.
Equivalent(s): CEE 500, CIE 525, CIE 528
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/31/2020 12/11/2020 MWF 9:10am - 10:00am MURK 115
8/31/2020 12/11/2020 W 3:40pm - 5:00pm SLS 120