Timeroom: Spring 2024

Displaying 1 - 10 of 88 Results for: Subject = ME
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 441 (01) - Introduction to Engineering Design and Solid Modeling

Intro Eng Design & Solid Model

Credits: 4.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   25  
CRN: 51989
Why are some products better than others? What is the definition of "better"? This course uses an inquiry-guided approach to explore the product design process via team design projects and laboratory exercises. Everyday products are examined from historical, societal, design, safety and manufacturing perspectives. Topics include ideation, sketching, design constraints, solid modeling, decision making, statistical quality control, manufacturing methods and engineering analysis. Students develop an appreciation for good design and the ability to communicate design ideas via 3-D solid models, written and oral reports.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): MATH 418
Attributes: Writing Intensive Course, Inquiry (Discovery)
Start Date End Date Days Time Location
1/23/2024 5/6/2024 MWF 9:10am - 10:00am PARS N116
1/23/2024 5/6/2024 M 2:10pm - 4:00pm KING W114
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 441 (02) - Introduction to Engineering Design and Solid Modeling

Intro Eng Design & Solid Model

Credits: 4.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   25  
CRN: 51990
Why are some products better than others? What is the definition of "better"? This course uses an inquiry-guided approach to explore the product design process via team design projects and laboratory exercises. Everyday products are examined from historical, societal, design, safety and manufacturing perspectives. Topics include ideation, sketching, design constraints, solid modeling, decision making, statistical quality control, manufacturing methods and engineering analysis. Students develop an appreciation for good design and the ability to communicate design ideas via 3-D solid models, written and oral reports.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): MATH 418
Attributes: Writing Intensive Course, Inquiry (Discovery)
Start Date End Date Days Time Location
1/23/2024 5/6/2024 MWF 9:10am - 10:00am PARS N116
1/23/2024 5/6/2024 W 2:10pm - 4:00pm KING W114
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 477 (01) - Introduction to Solid Modeling

Introduction to Solid Modeling

Credits: 1.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   10  
CRN: 52047
Introduction to solid modeling and engineering drawings using computer-aided design software. For Mechanical Engineering students, this course can only be taken with permission as an alternative to the required ME 441 Introduction to Engineering Design and Solid Modeling for students with extensive engineering design experience (e.g., high school or another university course), an engineering project based program (e.g., FIRST Robotics or Project Lead the Way), or similar experience (e.g., working in the industry). Students should not take both ME 441 and ME 477. Lecture and Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman, Sophomore
Only listed majors in section: MECHANICAL ENGR, UNDECLARED EPS
Start Date End Date Days Time Location
1/23/2024 5/6/2024 Hours Arranged TBA
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 503 (01) - Thermodynamics

Thermodynamics

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   37  
CRN: 50178
Properties of a pure substance, work and heat, laws of thermodynamics, entropy, thermodynamic relations, cycles.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): (PHYS 407 or PHYS 407S or PHYS 407H) and CHEM 405 May be taken concurrently and MATH 528 May be taken concurrently
Only listed colleges in section: Engineering&Physical Sciences
Instructors: John McHugh
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 9:40am - 11:00am MCC 240
1/23/2024 5/6/2024 M 1:10pm - 2:00pm PARS N116
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 503 (02) - Thermodynamics

Thermodynamics

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   37  
CRN: 50830
Properties of a pure substance, work and heat, laws of thermodynamics, entropy, thermodynamic relations, cycles.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): (PHYS 407 or PHYS 407S or PHYS 407H) and CHEM 405 May be taken concurrently and MATH 528 May be taken concurrently
Only listed colleges in section: Engineering&Physical Sciences
Instructors: John McHugh
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 9:40am - 11:00am MCC 240
1/23/2024 5/6/2024 M 3:10pm - 4:00pm PARS N116
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 503 (03) - Thermodynamics

Thermodynamics

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   37  
CRN: 50831
Properties of a pure substance, work and heat, laws of thermodynamics, entropy, thermodynamic relations, cycles.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): (PHYS 407 or PHYS 407S or PHYS 407H) and CHEM 405 May be taken concurrently and MATH 528 May be taken concurrently
Only listed colleges in section: Engineering&Physical Sciences
Instructors: John McHugh
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 9:40am - 11:00am MCC 240
1/23/2024 5/6/2024 M 12:10pm - 1:00pm PARS N116
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 503 (04) - Thermodynamics

Thermodynamics

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   37  
CRN: 50832
Properties of a pure substance, work and heat, laws of thermodynamics, entropy, thermodynamic relations, cycles.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): (PHYS 407 or PHYS 407S or PHYS 407H) and CHEM 405 May be taken concurrently and MATH 528 May be taken concurrently
Only listed colleges in section: Engineering&Physical Sciences
Instructors: John McHugh
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 9:40am - 11:00am MCC 240
1/23/2024 5/6/2024 M 6:40pm - 7:30pm PARS N114
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 526 (01) - Mechanics of Materials

Mechanics of Materials

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   42  
CRN: 50314
Introduces strength of materials. Analysis of members under torsion, axial, shear and bending stresses, superposition of stresses, stability of columns.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ME 525
Equivalent(s): CEE 501, CIE 526, CIE 529
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: Mrityunjay Kothari
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 5:10pm - 6:30pm DEM 112
1/23/2024 5/6/2024 T 12:40pm - 2:00pm KING N113
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 526 (02) - Mechanics of Materials

Mechanics of Materials

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   42  
CRN: 51453
Introduces strength of materials. Analysis of members under torsion, axial, shear and bending stresses, superposition of stresses, stability of columns.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ME 525
Equivalent(s): CEE 501, CIE 526, CIE 529
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: Mrityunjay Kothari
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 5:10pm - 6:30pm DEM 112
1/23/2024 5/6/2024 T 12:40pm - 2:00pm KING N328
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 526 (03) - Mechanics of Materials

Mechanics of Materials

Credits: 3.0
Term: Spring 2024 - Full Term (01/23/2024 - 05/06/2024)
Grade Mode: Letter Grading
Class Size:   67  
CRN: 52333
Introduces strength of materials. Analysis of members under torsion, axial, shear and bending stresses, superposition of stresses, stability of columns.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ME 525
Equivalent(s): CEE 501, CIE 526, CIE 529
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: Mrityunjay Kothari
Start Date End Date Days Time Location
1/23/2024 5/6/2024 TR 5:10pm - 6:30pm DEM 112
1/23/2024 5/6/2024 T 12:40pm - 2:00pm KING N343