Timeroom: Fall 2023

Displaying 3661 - 3670 of 3802 Results for: Campus = Durham
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 400 (03) - Introduction to CEPS Programs

Introduction to CEPS Programs

Credits: 1.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   55  
CRN: 16162
An overview of programs offered by the College of Engineering and Physical Sciences with an emphasis on skills needed to be successful academically, career opportunities and professional development. Required course of all undeclared majors in CEPS.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed classes in section: Freshman
Instructors: Elvis Marin, Stephanie Whitney
Start Date End Date Days Time Location
8/28/2023 12/11/2023 W 2:10pm - 3:30pm PARS N104
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 411 (01) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   24  
CRN: 12821
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Advanced Manufacturing Co-hort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: Brad Kinsey, Jinjae Kim, Benjamin Mitchell
Start Date End Date Days Time Location
8/28/2023 12/11/2023 F 2:10pm - 5:00pm TECHDR SW102F
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 411 (02) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   24  
CRN: 12882
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Internet Engineering Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: Dean Sullivan, Kyle Ouellette
Start Date End Date Days Time Location
8/28/2023 12/11/2023 F 2:10pm - 5:00pm IOL 148
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 411 (03) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 12883
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Ocean & Environmental Sensing Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: Diane Foster, Matthew Florence
Start Date End Date Days Time Location
8/28/2023 12/11/2023 F 2:10pm - 5:00pm CHASE 171
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 411 (04) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 13394
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Biomaterials Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: Linqing Li
Start Date End Date Days Time Location
8/28/2023 12/11/2023 F 2:10pm - 5:00pm PARS S253A
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (01) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11778
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2023. Section 1 : Thursdays 2:10 PM-5:00 PM 8/3123-9/21/23
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/28/2023 12/11/2023 R 2:10pm - 5:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (02) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11779
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2023. Fridays 9:10 AM-12:00 PM 9/1/23-9/22/23
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/28/2023 12/11/2023 F 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (03) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11780
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2023. Fridays 1:10-4:00 PM 9/1/23-9/22/23
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/28/2023 12/11/2023 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (04) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11781
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2023. Mondays 1:10-4:00 PM 9/25/23-10/23/23.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/28/2023 12/11/2023 M 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (05) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2023 - Full Term (08/28/2023 - 12/11/2023)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11782
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2023. Mondays 9:10 AM-12:00 PM 10/2/23-10/24/23
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/28/2023 12/11/2023 M 9:10am - 12:00pm KING S161