Timeroom: Fall 2021

Displaying 1751 - 1760 of 4379 Results for: All Courses
Durham   Engineering&Physical Sciences :: Earth Sciences

ESCI 999 (01) - Doctoral Research

Doctoral Research

Credits: 0.0
Term: Fall 2021 - Full Term* (08/30/2021 - 12/13/2021)
Grade Mode: Graduate Credit/Fail grading
Class Size:   1  
CRN: 13998
Cr/F.
Instructor Approval Required. Contact Instructor for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged TBA

ESL 450 (01) - Academic English II

Academic English for ESL

Credits: 4.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   14  
CRN: 12110
This course is intended for speakers of other languages who have already achieved a score of 525 or higher on the TOEFL (or an equivalent score on another standardized test of English language proficiency). Students will learn to read academic materials, do basic library research, write short papers in standard academic form, understand academic lectures, and participate in group work and class discussion. Writing Intensive. Students enrolled in ESL 450/ESL 650 are also eligible to enroll in two University of New Hampshire courses. Permission required. Special fee.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated for a maximum of 8 credits.
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 MW 8:10am - 10:00am HS 250C

ET 401 (M1) - Introduction to Additive Manufacturing

Additive Manufacturing

Credits: 4.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   10  
CRN: 13817
This project-based course introduces current methods in the design and fabrication of #D models. Students will apply and integrate techniques from mathematics, engineering, and computing design #D models and then manufacture them by the use of 3D printers. Credit cannot be earned by students who have completed UMST 599 SpcTop/Intro to 3D Printing. Special fee.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Campuses not allowed in section: Durham
Attributes: Environment,Tech&Society(Disc)
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 W 9:01am - 11:50am PANDRA P149

ET 405 (M1) - Engineering Design

Engineering Design

Credits: 4.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 15199
This course introduces the engineering design process and solid modeling software tools to create 3D CAD models and generate professional industry engineering drawings. Industry codes and procedures are practiced e.g. Geometric Dimensioning & Tolerancing (GD&T). Students complete hands-on projects and activities. The engineering design process includes: problem identification, concept creation, modeling, analysis, and documentation. Industry standard 3D modeling software is used with project design methodology for graphical, written, and oral communication of mechanical design ideas.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Attributes: Inquiry (Discovery)
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 TR 3:01pm - 4:20pm PANDRA P368

ET 431 (LM1) - Circuit Analysis I

Circuit Analysis I Lab

Credits: 0.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   10  
CRN: 15201
First course in electronic circuit analysis exploring the fundamental idea of current and voltage. Topics include the basic laws and theorems that govern simple electrical systems; Kirchoff's laws, Ohm's law, power relationships, resistance, inductance, and capacitance. Laboratory exercises will introduce the student to the basic measurement techniques of electronic systems using circuit building, power supplies, multi-meters and oscilloscopes. This course will also introduce basic circuit simulation techniques.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Co-Requisite: MATH 418
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 M 11:31am - 1:00pm PANDRA P114

ET 431 (M1) - Circuit Analysis I

Circuit Analysis I

Credits: 4.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   10  
CRN: 15200
First course in electronic circuit analysis exploring the fundamental idea of current and voltage. Topics include the basic laws and theorems that govern simple electrical systems; Kirchoff's laws, Ohm's law, power relationships, resistance, inductance, and capacitance. Laboratory exercises will introduce the student to the basic measurement techniques of electronic systems using circuit building, power supplies, multi-meters and oscilloscopes. This course will also introduce basic circuit simulation techniques.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Co-Requisite: MATH 418
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 MW 10:01am - 11:20am PANDRA P126

ET 502 (LM1) - Measurement and Control

Measurement and Control Lab

Credits: 0.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   15  
CRN: 16557
The course covers basic electricity and electronics (analog and digital) and electronic components (transistors, op-amps, SCR's). Electromechanical principles are introduced involving sensors and transducers used in production processes. Programming using the Arduino software and microcontroller is introduced. The basics of Programmable Logic Control (PLC) using Relay Ladder Logic programming is covered. Students use both hardware and software covered in the lecture portion of the course in the laboratory session. Prereq: MATH 418.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 F 11:21am - 1:20pm PANDRA P114

ET 502 (M1) - Measurement and Control

Measurement and Control

Credits: 4.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   15  
CRN: 16549
The course covers basic electricity and electronics (analog and digital) and electronic components (transistors, op-amps, SCR's). Electromechanical principles are introduced involving sensors and transducers used in production processes. Programming using the Arduino software and microcontroller is introduced. The basics of Programmable Logic Control (PLC) using Relay Ladder Logic programming is covered. Students use both hardware and software covered in the lecture portion of the course in the laboratory session. Prereq: MATH 418.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 F 10:01am - 11:20am PANDRA P102

ET 522 (LM1) - Digital Electronics II

Digital Electronics II Lab

Credits: 0.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   15  
CRN: 16556
Advanced topics in digital design techniques. Topics covered include: complex digital circuits, Flip-Flop circuits, counters, state machines, state diagrams, and memory devices. Laboratory exercises work with modern digital design methods with schematic entry, synthesis using VHDL, simulation modern digital systems implemented on Field Programmable Gate Arrays (FPGA). Prereq: ET 421.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 R 1:31pm - 3:00pm PANDRA P114

ET 522 (M1) - Digital Electronics II

Digital Electronics II

Credits: 4.0
Term: Fall 2021 - UNHM Credit (15 weeks) (08/30/2021 - 12/13/2021)
Grade Mode: Letter Grading
Class Size:   15  
CRN: 16547
Advanced topics in digital design techniques. Topics covered include: complex digital circuits, Flip-Flop circuits, counters, state machines, state diagrams, and memory devices. Laboratory exercises work with modern digital design methods with schematic entry, synthesis using VHDL, simulation modern digital systems implemented on Field Programmable Gate Arrays (FPGA). Prereq: ET 421.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 TR 12:01pm - 1:30pm PANDRA P104