Timeroom: Fall 2020

Manchester UNH-Manchester :: Communication Arts

CA 542 (M1) - Social Media for Organizations and Business

Social Media for Org &Business

Credits: 4.0
Term: Fall 2020 - UNHM Credit (15 weeks) (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 20
CRN: 16847

Focuses on the history, development and practical use of social media for organizational and business communications. A primary focus is on the latest social media tools and their use in developing social media campaigns. Hands-on student work is an important part of the course. Prereq: ENGL 401, CMN 455 or CA 500 - or permission. Cannot receive credit if earned for CA 520 Social Media for Organizations and Business.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Only listed campus in section: Manchester

Classes not allowed in section: Freshman

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	T	6:01pm - 9:00pm	ONLINE

Manchester UNH-Manchester :: Communication Arts

CA 618 (M1) - Documentary

Documentary

Credits: 4.0
Term: Fall 2020 - UNHM Credit (15 weeks) (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 15
CRN: 14255

Exploration of the historical development, ethics, funding, socio-cultural significance, and communication strategies of documentary film and video. May focus on a particular genre or genres. Prereq: any two 500 level CA courses (excluding CA 501), one of which must have CMN 455 as a prerequisite, or permission. Special fee. Writing intensive.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Only listed campus in section: Durham, Manchester

Attributes: Writing Intensive Course, Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	R	6:01pm - 9:00pm	ONLINE

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 402 (1SY) - 2D Computer Aided Design

2D Computer Aided Design

Credits: 3.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 15
CRN: 15886

This course will serve as an introduction to some of the fundamental principles of building design and land planning. You will prepare plans representative of building construction and land development commonly used in the architectural, engineering, surveying and construction fields. The emphasis will be on the end result: Preparing complete and professional plans. Through this, you will acquire basic skills in designing and plan layout required by these industries. We will approach this material by designing and drafting using computer software (AutoCAD). Another end outcome is that you will gain a certain level of competency with this AutoCAD software, a program used by the majority of the firms in these professions.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): TECH 564

Only listed campus in section: Durham

Only listed majors in section: CIVIL ENGR, ENVIRN ENGR, UNDECLARED EPS

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	M	8:10am - 9:00am	ONLINE

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 402 (2SY) - 2D Computer Aided Design

2D Computer Aided Design

Credits: 3.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 15
CRN: 15887

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): TECH 564

Only listed campus in section: Durham

Only listed majors in section: CIVIL ENGR, ENVIRN ENGR, UNDECLARED EPS

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	M	4:10pm - 5:00pm	ONLINE

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 402 (3SY) - 2D Computer Aided Design

2D Computer Aided Design

Credits: 3.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 15
CRN: 15888

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): TECH 564

Only listed campus in section: Durham

Only listed majors in section: CIVIL ENGR, ENVIRN ENGR, UNDECLARED EPS

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	W	8:10am - 9:00am	ONLINE

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 402 (4SY) - 2D Computer Aided Design

2D Computer Aided Design

Credits: 3.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 15
CRN: 15889

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): TECH 564

Only listed campus in section: Durham

Only listed majors in section: CIVIL ENGR, ENVIRN ENGR, UNDECLARED EPS

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	W	4:10pm - 5:00pm	ONLINE

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 520 (1SY) - Environmental Pollution and Protection: A Global Context

Environmntl Pollutn & Protectn

Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 160
CRN: 14121
Built-in-Books Fee: $39.99

Introduces environmental science and engineering and the anthropogenic causes of environmental change. Emphasizes the causes, effects, and controls of air, water, and land pollution. The political, ecological, economic, ethical, and engineering aspects of environmental pollution and control are discussed. Field trips. Writing intensive.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): BIOL 520, ENCV 520, ENE 520

Only listed campus in section: Durham

Attributes: Writing Intensive Course, Scheduled meeting time, Online (no campus visits), EUNH, Environment,Tech&Society(Disc)

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	TR	9:40am - 11:00am	ONLINE

Books and Course Materials: This course section is participating in UNH’s Built-in-Books and Course Materials program which offers materials at below market rates. Information about this program can be found at this link: https://td.unh.edu/TDClient/KB/ArticleDet?ID=2158

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 650 (1SY) - Fluid Mechanics

Fluid Mechanics

Can be taken by students who are remote.

Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 120
CRN: 14149

Properties of fluids, fluid statics, continuity, momentum and energy equations, resistance to flow, boundary layer theory, flow in open channels and piping systems, dimensional analysis, similitude, drag, and lift. Laboratory exercises on measurement of fluid properties, energy principles, flow resistance, discharge measurements, momentum, hydropower, groundwater flow, and settling of spheres. Prereq: PHYS 407, CEE Hydrology major; or permission. Lab. Writing intensive.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): CIE 642

Only listed campus in section: Durham

Attributes: Writing Intensive Course, Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	MWF	11:10am - 12:00pm	ONLINE

Additional Course Details:

Course will be offered online synchronously with face-to-face lectures. Chase 105 has a COVID seating of 27, therefore not all students will be able to attend face-to-face lectures. Prior to the start of the semester, each student shall be assigned attendance dates for face-to-face lectures. All lectures shall be recorede and the recording available soon after each lecture. All labs shall be offered ONLINE only.

Click to see: Syllabus

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 720 (1SY) - Solid and Hazardous Waste Engineering

Solid & Hazardous Waste Eng

Can be taken by students who are remote.

Credits: 3.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 45
CRN: 14122

A thorough examination of the problems that exist in hazardous and solid waste management are presented in terms of the current regulations and engineering approaches used to develop solutions. Topics include risk-based decision making, transport and fate of contaminants, and the fundamental physical, chemical, and biological concepts, which make up the basis for technological solutions to these waste management problems. Case studies are used throughout the course to highlight key concepts and provide real-world examples.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): ENCV 742, ENE 742

Only listed campus in section: Durham

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	MWF	10:10am - 11:00am	ONLINE

Durham Engineering&Physical Sciences :: Civil&Environmental Engnrng

CEE 733 (1SY) - Public Infrastructure Asset Management

Pub Infrastructure Asset Mgt

Can be taken by students who are remote.

Credits: 4.0
Term: Fall 2020 - Full Term (08/31/2020 - 12/11/2020)
Grade Mode: Letter Grading

Class Size: 45
CRN: 16448

The course provides a thorough examination of the growing engineering field of Public Infrastructure Assess Management (IAM). The course enables the student to design an IAM system. It touches upon all types of public infrastructure with a particular focus on water infrastructure for the semester design project. Students build upon their engineering economics and project engineering skills and use simple IAM software along with GIS applications. Practice leaders from the industry provide guest lectures throughout the semester. A focus on triple bottom line or the Societal, Environmental and Economic aspects of IAM are included. The format is a modified team base design learning experience providing practice in processing of technical lecture material, personal performance evaluation (frequent quizzes) and team based performance evaluation. Student groups will present their design to the class and provide a written engineering report. Pre- or Coreq: CEE 502 and CEE 620.

Department Approval Required. Contact Academic Department for permission then register through Webcat.

Equivalent(s): ENE 739

Only listed campus in section: Durham

Only listed colleges in section: Engineering&Physical Sciences

Only listed classes in section: Junior, Senior

Attributes: Scheduled meeting time, Online (no campus visits), EUNH

Instructors: STAFF

Start Date	End Date	Days	Time	Location
8/31/2020	12/11/2020	MWF	2:10pm - 3:00pm	ONLINE