Timeroom: Spring 2023

Displaying 251 - 260 of 392 Results for: Campus = Manchester

ET 644 (M1) - Mechanical Engineering Technology Concepts in Analysis and Design

ME Concepts in Analysis&Design

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 52147
Kinematics, kinetics, work and energy, fluids, heat transfer; application of these concepts to problems in mechanical design.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ET 450 and ET 560
Only listed majors in section: MECHENGRTECH
Instructors: Jeffery Beltramo
Start Date End Date Days Time Location
1/24/2023 5/8/2023 F 9:01am - 11:50am PANDRA P376

ET 645 (LM1) - Fluid Technology and Heat Transfer II

Fluid Tech & Heat Trans II Lab

Credits: 0.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 54342
The course prepares the student to apply thermal and fluid engineering principles to situations typical of those encountered in industry. Topics covered include thermodynamics of two phase fluids, fluid dynamics of piping systems, principles of turbomachinery, and analysis of power cycles. No credit for students who have taken ET 696 Special Topics in Mechanical Engineering Technology for credit. Lab.
Section Comments: Also meets in P101
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ET 635 and MATH 425
Only listed majors in section: MECHENGRTECH
Instructors: Amrit Singh Khalsa
Start Date End Date Days Time Location
1/24/2023 5/8/2023 R 4:31pm - 5:50pm PANDRA P116

ET 645 (M1) - Fluid Technology and Heat Transfer II

Fluid Tech and Heat Trans II

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 54341
The course prepares the student to apply thermal and fluid engineering principles to situations typical of those encountered in industry. Topics covered include thermodynamics of two phase fluids, fluid dynamics of piping systems, principles of turbomachinery, and analysis of power cycles. No credit for students who have taken ET 696 Special Topics in Mechanical Engineering Technology for credit. Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ET 635 and MATH 425
Only listed majors in section: MECHENGRTECH
Instructors: Amrit Singh Khalsa
Start Date End Date Days Time Location
1/24/2023 5/8/2023 TR 3:01pm - 4:20pm PANDRA P146

ET 675 (LM1) - Electrical Technology

Electrical Technology Lab

Credits: 0.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 52144
Electrical circuits: DC and AC network analysis, power factors, transformers, power supplies. Electronic circuits--diodes, transistors and operational amplifiers. Digital circuits and introduction to computer-aided engineering. Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): MATH 425
Only listed majors in section: MECHENGRTECH
Instructors: Erich Whitney
Start Date End Date Days Time Location
1/24/2023 5/8/2023 T 7:31pm - 9:30pm PANDRA P114

ET 675 (M1) - Electrical Technology

Electrical Technology

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 52143
Electrical circuits: DC and AC network analysis, power factors, transformers, power supplies. Electronic circuits--diodes, transistors and operational amplifiers. Digital circuits and introduction to computer-aided engineering. Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): MATH 425
Only listed majors in section: MECHENGRTECH
Instructors: Erich Whitney
Start Date End Date Days Time Location
1/24/2023 5/8/2023 TR 6:01pm - 7:20pm PANDRA P102

ET 677 (LM1) - Analog Systems

Analog Systems Lab

Credits: 0.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 52146
Operational amplifiers. Transducers and measurement systems. Frequency response. Grounding and shielding. Signal and power interfacing techniques. Design project. Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ET 542
Only listed majors in section: ELECENGRTECH
Instructors: Christopher LeBlanc
Start Date End Date Days Time Location
1/24/2023 5/8/2023 R 7:31pm - 9:00pm PANDRA P114

ET 677 (M1) - Analog Systems

Analog Systems

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 52145
Operational amplifiers. Transducers and measurement systems. Frequency response. Grounding and shielding. Signal and power interfacing techniques. Design project. Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ET 542
Only listed majors in section: ELECENGRTECH
Instructors: Christopher LeBlanc
Start Date End Date Days Time Location
1/24/2023 5/8/2023 TR 6:01pm - 7:20pm PANDRA P101

ET 751 (M1) - Mechanical Engineering Technology Project

Mechanical Engnrg Tech Project

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   14  
CRN: 52149
Students are required to find solutions to actual technological problems in design, fabrication, and testing as posed by industry. Students define the problem, prepare a budget, and work with the client company to research, design, build, and test the software and/or hardware needed. A year-long course: 4 credits per semester; an IA grade (continuous course) given at the end of first semester. Withdrawal from course results in loss of credit.
Section Comments: Cross listed with ET 791
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated for a maximum of 8 credits.
Cross listed with : ET 791.M1
Only listed classes in section: Senior
Only listed majors in section: MECHENGRTECH
Start Date End Date Days Time Location
1/24/2023 5/8/2023 M 4:01pm - 5:20pm PANDRA P149

ET 781 (M1) - Introduction to Automation Engineering

Intro Automation Engineering

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   15  
CRN: 55389
Students are introduced to the topics needed to develop a good understanding of the basic principles of Automation Engineering. This introductory course covers a wide variety of topics such as performance of sensors, actuators, motors and drives, PLC's and HMI, environmental controls , robots, machine vision systems, and controls and system integration. Open to Electrical Engineering Technology, and Mechanical Engineering Technology majors only.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed classes in section: Senior
Only listed majors in section: ELECENGRTECH, MECHENGRTECH
Instructors: Dan Larochelle
Start Date End Date Days Time Location
1/24/2023 5/8/2023 TR 3:01pm - 4:20pm PANDRA P126

ET 788 (M1) - Introduction to Digital Signal Processing

Intro to DSP

Credits: 4.0
Term: Spring 2023 - UNHM Credit (15 weeks) (01/24/2023 - 05/08/2023)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 52148
This course will deal with the topics of spectral representation of periodic and non-periodic analog signals followed by discrete sampling and aliasing and how it relates to Nyquist sampling theorem. The z-transform will be introduced as the required mathematical tool along with an introduction to MATLAB and its associated DSP tool box. Spectral analysis of digital signal will be accomplished using these tools. Convolution and digital filtering will also be covered. Lab.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Prerequisite(s): ET 680
Only listed majors in section: ELECENGRTECH
Instructors: Erich Whitney
Start Date End Date Days Time Location
1/24/2023 5/8/2023 MW 6:01pm - 7:20pm PANDRA P102