Timeroom: Fall 2022

Displaying 3741 - 3750 of 3867 Results for: Campus = Durham
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (01) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12078
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
9/1/2022 9/22/2022 R 2:10pm - 5:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (02) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12079
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
9/2/2022 9/23/2022 F 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (03) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12080
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
9/2/2022 9/23/2022 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (04) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12081
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
9/26/2022 10/24/2022 M 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (05) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12082
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/3/2022 10/31/2022 M 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (06) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12083
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Only listed majors in section: FOREST TECH
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/4/2022 10/25/2022 T 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (07) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12084
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/27/2022 11/17/2022 R 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (08) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12085
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIOR in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/28/2022 12/2/2022 F 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (09) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12120
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
10/28/2022 12/2/2022 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 750 (01) - Intellectual Asset Management for Engineers and Scientists

Intellectual Asset Management

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   25  
CRN: 12544
This course provides an introduction to the most important topic in the 21 century--intellectual assets. Students will receive an overview in practical, real-world aspects of managing intellectual assets (copyright, patents, trademarks, trade secrets, etc.). Students taking this course will be exposed to lectures, guest presentations, and case studies aimed at increasing their understanding of intellectual property strategies and related legal issues; technology assessment; technology valuation; licensing issues, strategies and negotiation techniques; business planning and start-up company development; and strategies for attracting investment for new ideas. The instructors and guest speakers for the course are involved in managing, protecting, investing in, or commercializing intellectual property assets in real world settings such as university technology transfer offices, patent law firms, venture capital firms, start-up companies, and related settings.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Matt Simon
Start Date End Date Days Time Location
8/29/2022 12/12/2022 W 5:10pm - 8:00pm KING S145