Timeroom: Fall 2022

Displaying 21 - 30 of 53 Results for: Subject = ME
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 726 (01) - Fracture Mechanics

Fracture Mechanics

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   10  
CRN: 16267
The goal is to acquaint the student with understanding of the basic principles behind the derivation of the most common linear and non-linear fracture mechanical equations. The aim is also to gain knowledge in analytical predictions of the failure of materials and become familiar with the ongoing fracture mechanical research. The motivation for this course is that many practical problems in mechanical engineering, manufacturing and materials science have to do with material deformation and failure. Prereq: Mechanics of Materials; Introduction to Materials Science.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Instructors: Marko Knezevic
Start Date End Date Days Time Location
8/29/2022 12/12/2022 MW 2:10pm - 3:00pm KING N133
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 727 (01) - Advanced Mechanics of Solids

Advanced Mechanics of Solids

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   15  
CRN: 16965
Stress, strain, stress-strain relations, anisotropic behavior, introduction to elasticity, plane stress/strain, bending and torsion of members with general cross-sections introduction to thin plates and shells, energy methods. Prereq: ME 526 or permission.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Instructors: Mrityunjay Kothari
Start Date End Date Days Time Location
8/29/2022 12/12/2022 TR 3:40pm - 6:10pm NESM 316
Additional Course Details: 

SCHEDULING NOTE: This class will meet ONLY on Thursdays from 3:40 PM to 6:10 PM.

Mathematical preliminaries on vector and tensor algebra and calculus. Continuum mechanical description of deformable solids: concepts of deformations, strains, stress, energy, and how these connect together. Linear elastic constitutive laws. Formulations and solution procedures for boundary value problems in linear elasticity. Plane stress/strain, bending, and selection of 2D and 3D problems.

I will frequently recommend preparatory and/or follow-up reading to supplement lectures. These readings will be an important tool to aid in-class learning.

 

 

 

Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 742 (01) - Materials Processing in Manufacturing

Materials Processing in Manuf

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   30  
CRN: 16269
Description and analysis of major material shaping processes in modern manufacturing. Casting: fluid flow and heat transfer, solidification, casting processes, properties of cast components and geometric capabilities. Forming: plasticity and formability, bulk and sheet metal forming processes, properties of formed components and geometric capabilities. Machining: cutting forces and tool wear, machining processes, properties of machined components and geometric capabilities. Overview of some non-conventional processes. Lab demonstrations. Prereq: ME 526 and ME 561.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Instructors: Jinjin Ha
Start Date End Date Days Time Location
8/29/2022 12/12/2022 MWF 11:10am - 12:00pm KING N113
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 747 (01) - Experimental Measurement and Modeling of Complex Systems

Exprmtl Measurement & Modeling

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   3  
CRN: 11623
Experimental measurements for evaluation, design, and control of mechanical, electrical, and thermal/fluid phenomena. Emphasizes the dynamic response of both sensors and systems and the interactions between physical processes. Experimental examples are drawn from mechanics, material science, thermal-fluid science and controls. Prereq: ME 646; ME 670. Writing intensive.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: May-Win Thein
Start Date End Date Days Time Location
8/29/2022 12/12/2022 TR 9:40am - 11:00am PARS N104
8/29/2022 12/12/2022 M 2:10pm - 5:00pm KING S221
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 747 (02) - Experimental Measurement and Modeling of Complex Systems

Exprmtl Measurement & Modeling

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   25  
CRN: 11624
Experimental measurements for evaluation, design, and control of mechanical, electrical, and thermal/fluid phenomena. Emphasizes the dynamic response of both sensors and systems and the interactions between physical processes. Experimental examples are drawn from mechanics, material science, thermal-fluid science and controls. Prereq: ME 646; ME 670. Writing intensive.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: May-Win Thein
Start Date End Date Days Time Location
8/29/2022 12/12/2022 TR 9:40am - 11:00am PARS N104
8/29/2022 12/12/2022 T 2:10pm - 5:00pm KING S221
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 747 (03) - Experimental Measurement and Modeling of Complex Systems

Exprmtl Measurement & Modeling

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   25  
CRN: 11625
Experimental measurements for evaluation, design, and control of mechanical, electrical, and thermal/fluid phenomena. Emphasizes the dynamic response of both sensors and systems and the interactions between physical processes. Experimental examples are drawn from mechanics, material science, thermal-fluid science and controls. Prereq: ME 646; ME 670. Writing intensive.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: May-Win Thein
Start Date End Date Days Time Location
8/29/2022 12/12/2022 TR 9:40am - 11:00am PARS N104
8/29/2022 12/12/2022 W 2:10pm - 5:00pm KING S221
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 747 (04) - Experimental Measurement and Modeling of Complex Systems

Exprmtl Measurement & Modeling

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   25  
CRN: 11626
Experimental measurements for evaluation, design, and control of mechanical, electrical, and thermal/fluid phenomena. Emphasizes the dynamic response of both sensors and systems and the interactions between physical processes. Experimental examples are drawn from mechanics, material science, thermal-fluid science and controls. Prereq: ME 646; ME 670. Writing intensive.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: May-Win Thein
Start Date End Date Days Time Location
8/29/2022 12/12/2022 TR 9:40am - 11:00am PARS N104
8/29/2022 12/12/2022 R 2:10pm - 5:00pm KING S221
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 747 (05) - Experimental Measurement and Modeling of Complex Systems

Exprmtl Measurement & Modeling

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   13  
CRN: 12121
Experimental measurements for evaluation, design, and control of mechanical, electrical, and thermal/fluid phenomena. Emphasizes the dynamic response of both sensors and systems and the interactions between physical processes. Experimental examples are drawn from mechanics, material science, thermal-fluid science and controls. Prereq: ME 646; ME 670. Writing intensive.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: May-Win Thein
Start Date End Date Days Time Location
8/29/2022 12/12/2022 TR 9:40am - 11:00am PARS N104
8/29/2022 12/12/2022 W 5:40pm - 8:30pm KING S221
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 755 (01) - Senior Design Project I

Senior Design Project I

Credits: 2.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   120  
CRN: 10430
Part I of this two-part sequence emphasizes problem definition, analysis, development of alternative concepts, decision-making processes, synthesis of an optimum solution and the development of a conceptual design. Lectures on these and other topics are combined with seminars given by professionals from industry, government, and academia. Related topics include ISO9000 quality systems, engineering management, design review process, engineering economics, team building and communications. Students are organized into project teams to develop a conceptual design. Formal design reviews are conducted. A formal proposal documents the semester's work. Prereq: Senior standing in ME. Lab. Writing intensive.
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Equivalent(s): ME 656
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: Anthony Puntin
Start Date End Date Days Time Location
8/29/2022 12/12/2022 WF 1:10pm - 2:00pm MURK 115
Durham   Engineering&Physical Sciences :: Mechanical Engineering

ME 777 (01) - Computer Aided Engineering

Computer Aided Engineering

Credits: 4.0
Term: Fall 2022 - Full Term (08/29/2022 - 12/12/2022)
Grade Mode: Letter Grading
Class Size:   34  
CRN: 11780
In this course, modules of Solid Works (beyond its basic solid modeling capabilities) and other software is used to demonstrate how computer based tools can be used in engineering practice, in particular design analysis and optimization. Emphasis placed on using knowledge from past engineering courses to obtain theoretical calculations to compare with the results from the computer software package. Prereq: ME 526 Strength of Materials; ME 627 Mechanics III; ME 603 Heat Transfer; and ME 608 Fluid Dynamics (or equivalent).
Registration Approval Required. Contact Instructor or Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Attributes: Writing Intensive Course
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/29/2022 12/12/2022 M 4:10pm - 6:00pm KING N343
8/29/2022 12/12/2022 M 6:10pm - 8:00pm KING W114