Timeroom: Spring 2022

Displaying 231 - 240 of 397 Results for: Campus = Manchester

ET 450 (M1) - Statics and Strength of Materials

Statics and Strength

Credits: 4.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 55434
The statics portion of the course analyzes equilibrium force systems applied to rigid bodies and the internal stresses and strains which result. The strength of materials portion of the course investigates the relationship between internal stress and strain to material properties and behavior. Topics include free body diagrams, equilibrium force analysis, tension, compression, shear and moment diagrams, torsion, bending, trusses, and beam deflection analysis. Prereq: MATH 418. Pre-or Co-req: PHYS 407.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 F 8:01am - 10:50am PANDRA P102

ET 505 (LM1) - Material Science

Material Science Lab

Credits: 0.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57004
This course studies the properties and behavior of engineering materials. Materials considered are ferrous and nonferrous metals and alloys, as well as plastics, ceramics, and composites. Material property and behavior modification through thermal and mechanical means is studied: such as heat treatment of steel or cold work forming. Selection of materials based upon manufacturing and design requirements is emphasized. Lab experiments will complement lecture material where appropriate. Prereq: MATH 425, ET 450.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 M 11:31am - 1:00pm PANDRA P116

ET 505 (M1) - Material Science

Material Science

Credits: 4.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57003
This course studies the properties and behavior of engineering materials. Materials considered are ferrous and nonferrous metals and alloys, as well as plastics, ceramics, and composites. Material property and behavior modification through thermal and mechanical means is studied: such as heat treatment of steel or cold work forming. Selection of materials based upon manufacturing and design requirements is emphasized. Lab experiments will complement lecture material where appropriate. Prereq: MATH 425, ET 450.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 MW 10:01am - 11:20am PANDRA P142

ET 522 (LM1) - Digital Electronics II

Digital Electronics II Lab

Credits: 0.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57339
Advanced topics in digital design techniques. Topics covered include: complex digital circuits, Flip-Flop circuits, counters, state machines, state diagrams, and memory devices. Laboratory exercises work with modern digital design methods with schematic entry, synthesis using VHDL, simulation modern digital systems implemented on Field Programmable Gate Arrays (FPGA). Prereq: ET 421.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 W 10:31am - 11:50am PANDRA P114

ET 522 (M1) - Digital Electronics II

Digital Electronics II

Credits: 4.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57338
Advanced topics in digital design techniques. Topics covered include: complex digital circuits, Flip-Flop circuits, counters, state machines, state diagrams, and memory devices. Laboratory exercises work with modern digital design methods with schematic entry, synthesis using VHDL, simulation modern digital systems implemented on Field Programmable Gate Arrays (FPGA). Prereq: ET 421.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 MW 9:01am - 10:20am PANDRA P102

ET 541 (M1) - Electronic Devices

Electronic Devices

Credits: 4.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57337
Introductory course in Electronic devices looking at modern components used in current electronic systems. This course will develop techniques to analyze basic semiconductor devices such as diodes, field effect transistors and bipolar transistors. Specific diode circuits covered include: rectifying, clipping, and clamping circuit configurations. Methods to model, analyze and bias the basic transistor amplification circuits will be developed. Lab exercises will explore these types of circuit both in physical prototyping and simulation. Prereq: MATH 425; ET 431; ET 432.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 T 1:31pm - 5:00pm PANDRA P101

ET 542 (LM1) - Analog Electronics

Analog Electronics Lab

Credits: 0.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57007
Design of fundamental analog circuit blocks in electronic systems. Multistage amplifiers; feedback systems and stability; power amplifiers. Nonlinear electronic circuits: oscillators, function generators; clippers and peak detectors; A/D and D/A conversion. Laboratory exercises will explore building physical prototypes and the use of simulation to build and analyze Analog systems.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 T 1:01pm - 2:50pm PANDRA P114

ET 542 (M1) - Analog Electronics

Analog Electronics

Credits: 4.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57006
Design of fundamental analog circuit blocks in electronic systems. Multistage amplifiers; feedback systems and stability; power amplifiers. Nonlinear electronic circuits: oscillators, function generators; clippers and peak detectors; A/D and D/A conversion. Laboratory exercises will explore building physical prototypes and the use of simulation to build and analyze Analog systems.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 TR 10:01am - 11:20am PANDRA P142

ET 560 (LM1) - Machine Design II

Machine Design II Lab

Credits: 0.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57002
This course is a continuation of ET 550 Machine Design portion. Additional machine elements and their related analyses are covered. Power transmission drive components such as gears, belts, chains, clutches and brakes are covered. Lab projects will involve individual components or combined items above. Computer application software is used where appropriate, including CAD and Excel. Prereq: ET 550.
Section Comments: Also meets in the Machine Shop
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 R 1:01pm - 2:50pm PANDRA P116

ET 560 (M1) - Machine Design II

Machine Design II

Credits: 4.0
Term: Spring 2022 - UNHM Credit (15 weeks) (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   20  
CRN: 57001
This course is a continuation of ET 550 Machine Design portion. Additional machine elements and their related analyses are covered. Power transmission drive components such as gears, belts, chains, clutches and brakes are covered. Lab projects will involve individual components or combined items above. Computer application software is used where appropriate, including CAD and Excel. Prereq: ET 550.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 TR 10:01am - 11:20am PANDRA P146