Timeroom: Spring 2022

Displaying 3781 - 3790 of 3914 Results for: Campus = Durham
Durham   Engineering&Physical Sciences :: Technology

TECH 412 (02) - Innovation Scholars II

Innovation Scholars

Credits: 2.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 53735
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity. Prereq: TECH 411.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Attributes: Inquiry (Discovery)
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 F 2:10pm - 5:00pm IOL 148
Durham   Engineering&Physical Sciences :: Technology

TECH 412 (03) - Innovation Scholars II

Innovation Scholars

Credits: 2.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 53736
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity. Prereq: TECH 411.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Attributes: Inquiry (Discovery)
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 F 2:10pm - 5:00pm CHASE 175
Durham   Engineering&Physical Sciences :: Technology

TECH 412 (04) - Innovation Scholars II

Innovation Scholars II

Credits: 2.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   15  
CRN: 54911
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity. Prereq: TECH 411.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed classes in section: Freshman
Attributes: Inquiry (Discovery)
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 F 2:10pm - 5:00pm JAMS 240
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (01) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 52130
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 2/18/2022 F 8:10am - 11:00am KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (02) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 53402
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 2/18/2022 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 697 (01) - CEPS Industrial Experience

CEPS Industrial Experience

Credits: 1.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 51330
Students in the CEPS Industrial Experience must register for TECH 697 during each semester (fall and/or spring) in which they are participating in their industrial work experience. Student in the minor must get permission from the minor advisor in order to register for this course.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated for a maximum of 2 credits.
Equivalent(s): TECH 797
Only listed colleges in section: Engineering&Physical Sciences
Classes not allowed in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 Hours Arranged TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 697 (02) - CEPS Industrial Experience

CEPS Industrial Experience

Credits: 1.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 52749
Students in the CEPS Industrial Experience must register for TECH 697 during each semester (fall and/or spring) in which they are participating in their industrial work experience. Student in the minor must get permission from the minor advisor in order to register for this course.
Section Comments: This section is intended for students who will not be utilizing campus supports and facilities while completing your experience.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated for a maximum of 2 credits.
Equivalent(s): TECH 797
Only listed colleges in section: Engineering&Physical Sciences
Classes not allowed in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 Hours Arranged TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 750 (01) - Intellectual Asset Management for Engineers and Scientists

Intellectual Asset Management

Credits: 4.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   30  
CRN: 52707
This course provides an introduction to the most important topic in the 21 century--intellectual assets. Students will receive an overview in practical, real-world aspects of managing intellectual assets (copyright, patents, trademarks, trade secrets, etc.). Students taking this course will be exposed to lectures, guest presentations, and case studies aimed at increasing their understanding of intellectual property strategies and related legal issues; technology assessment; technology valuation; licensing issues, strategies and negotiation techniques; business planning and start-up company development; and strategies for attracting investment for new ideas. The instructors and guest speakers for the course are involved in managing, protecting, investing in, or commercializing intellectual property assets in real world settings such as university technology transfer offices, patent law firms, venture capital firms, start-up companies, and related settings.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 T 5:10pm - 8:00pm KING N101
Durham   Engineering&Physical Sciences :: Technology

TECH 780 (01) - Intellectual Property Law for Engineers & Scientists

Intellectual Property Law

Credits: 3.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   36  
CRN: 53694
This course will cover the major doctrines of trade secrets, patents, copyrights, and trademarks, including what kinds of information qualify for protection, what must be done to obtain that protection, what rights owners and others have to use the information, and the underlying policy choices made by legislators and courts.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 R 5:10pm - 8:00pm KING N101
Durham   Engineering&Physical Sciences :: Technology

TECH 797 (01) - Undergraduate Ocean Research Project

Undergrad Ocean Research Prog

Credits: 2.0
Term: Spring 2022 - Full Term (01/25/2022 - 05/09/2022)
Grade Mode: Letter Grading
Class Size:   35  
CRN: 50331
Students work as members of interdisciplinary project teams on contemporary ocean-related problems under the guidance of a faculty adviser. Student team defines problem, prepares a budget, conducts literature surveys, engages in dialogue with experts in the community, deals with vendors, designs, and builds a working engineering model, gathers and analyzes scientific data or conducts a comprehensive study, makes interim reports, and defends the results before a jury of experts. Prereq: normally senior standing and permission of the program director. A yearlong effort: 2 credits each semester, 4 credits total, an IA (continuous course) grade given at the end of the first semester. Writing intensive.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated up to 1 times.
Equivalent(s): TECH 697
Attributes: Writing Intensive Course
Instructors: STAFF
Start Date End Date Days Time Location
1/25/2022 5/9/2022 R 12:40pm - 2:00pm CHASE 105