Timeroom: Fall 2021

Displaying 3711 - 3720 of 3851 Results for: Campus = Durham
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (03) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12321
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
9/10/2021 10/1/2021 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (04) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12322
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
10/4/2021 11/1/2021 M 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (05) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12323
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
9/27/2021 10/25/2021 M 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (06) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12324
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Only listed majors in section: FOREST TECH
Instructors: STAFF
Start Date End Date Days Time Location
10/5/2021 10/26/2021 T 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (07) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12325
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: STAFF
Start Date End Date Days Time Location
10/28/2021 11/23/2021 R 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (08) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12326
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIOR in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
10/29/2021 11/19/2021 F 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (09) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12369
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
10/29/2021 11/19/2021 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (10) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 13123
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 697 (01) - CEPS Industrial Experience

CEPS Industrial Experience

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   10  
CRN: 13394
Students in the CEPS Industrial Experience must register for TECH 697 during each semester (fall and/or spring) in which they are participating in their industrial work experience. Student in the minor must get permission from the minor advisor in order to register for this course.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated for a maximum of 2 credits.
Equivalent(s): TECH 797
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Classes not allowed in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged OFFCMP TBA
Durham   Engineering&Physical Sciences :: Technology

TECH 697 (02) - CEPS Industrial Experience

CEPS Industrial Experience

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   10  
CRN: 13873
Students in the CEPS Industrial Experience must register for TECH 697 during each semester (fall and/or spring) in which they are participating in their industrial work experience. Student in the minor must get permission from the minor advisor in order to register for this course.
Section Comments: This section is intended for students who will not be utilizing campus supports and facilities while completing your experience.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Repeat Rule: May be repeated for a maximum of 2 credits.
Equivalent(s): TECH 797
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Classes not allowed in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 Hours Arranged OFFCMP TBA