Timeroom: Fall 2021

Displaying 4211 - 4220 of 4379 Results for: All Courses
Durham   Engineering&Physical Sciences :: Technology

TECH 400 (01) - Introduction to CEPS Programs

Introduction to CEPS Programs

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   65  
CRN: 10604
An overview of programs offered by the College of Engineering and Physical Sciences with an emphasis on skills needed to be successful academically, career opportunities and professional development. Required course of all undeclared majors in CEPS. Cr/F.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Only listed majors in section: UNDECLARED EPS
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 W 3:10pm - 4:30pm KING N343
Durham   Engineering&Physical Sciences :: Technology

TECH 411 (01) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   24  
CRN: 13851
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Advanced Manufacturing Co-hort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 F 2:10pm - 5:00pm TECHDR SW102F
Durham   Engineering&Physical Sciences :: Technology

TECH 411 (02) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 13949
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Internet Engineering Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 F 2:10pm - 5:00pm IOL 148
Durham   Engineering&Physical Sciences :: Technology

TECH 411 (03) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 13950
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Ocean & Environmental Sensing Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 F 2:10pm - 5:00pm CHASE 171
Durham   Engineering&Physical Sciences :: Technology

TECH 411 (04) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 14901
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Seacoast Field Science Co-hort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: STAFF
Start Date End Date Days Time Location
8/30/2021 12/13/2021 F 2:10pm - 5:00pm JAMS 240
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (01) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12319
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: STAFF
Start Date End Date Days Time Location
9/9/2021 9/30/2021 R 2:10pm - 5:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (02) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12320
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
9/10/2021 10/1/2021 F 8:10am - 11:00am KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (03) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12321
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
9/10/2021 10/1/2021 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (04) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12322
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
10/4/2021 11/1/2021 M 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology

TECH 602 (05) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2021 - Full Term (08/30/2021 - 12/13/2021)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 12323
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Prereq: no course prerequisites, but students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only. Special fee. Cr/F.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2021.
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Equivalent(s): TECH 602A
Only listed campus in section: Durham, Manchester
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: STAFF
Start Date End Date Days Time Location
9/27/2021 10/25/2021 M 1:10pm - 4:00pm KING S161