Timeroom: Fall 2024

Displaying 4441 - 4450 of 4580 Results for: attr = Array
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 411 (03) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 12423
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Ocean & Environmental Sensing Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: Diane Foster, Matthew Florence
Start Date End Date Days Time Location
8/26/2024 12/9/2024 F 2:10pm - 5:00pm CHASE 171
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 411 (04) - Innovation Scholars I

Innovation Scholars I

Credits: 2.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   20  
CRN: 12805
A research driven introduction to the university experience. Science, mathematical, and engineering principles will be applied within a cohort research experience for first year students. Under the direction of a faculty mentor(s), student teams will be guided through a year-long research experience culminating in a presentation of research results at the Undergraduate Research Conference, or equivalent activity.
Section Comments: Biomaterials Cohort
Department Approval Required. Contact Academic Department for permission then register through Webcat.
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Freshman
Instructors: Linqing Li
Start Date End Date Days Time Location
8/26/2024 12/9/2024 F 2:10pm - 5:00pm PARS S253
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (01) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11546
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2024. Section 1 : Thursdays 1:10 PM-4:00 PM 8/29/24-9/19/24
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 R 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (02) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11547
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2024. Fridays 9:10 AM-12:00 PM 8/30/24-9/20/24
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 F 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (03) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11548
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2024. Fridays 1:10-4:00 PM 8/30/24-9/20/24
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 F 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (04) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11549
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2024. Mondays 9:10 AM- 12:00 PM 9/23//24-10/14/24.
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 M 9:10am - 12:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (05) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11550
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS in Fall 2024. Mondays 1:10 PM- 4:00 PM 9/30/24-10/21/24
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 M 1:10pm - 4:00pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (06) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11551
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2024. Tuesdays 9:40 AM-12:30 PM 10/1/24 - 10/22/24
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 T 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (07) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11552
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIORS and SOPHOMORES and JUNIORS who will be JUNIORS in Fall 2024. Thursdays 9:40 AM- 12:30 PM 10/24/2024-11/14/2024
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Sophomore, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 R 9:40am - 12:30pm KING S161
Durham   Engineering&Physical Sciences :: Technology
Save this Course  

TECH 602 (08) - Machine Shop Training

Machine Shop Training

Credits: 1.0
Term: Fall 2024 - Full Term (08/26/2024 - 12/09/2024)
Grade Mode: Credit/Fail Grading
Class Size:   4  
CRN: 11553
In this course, the operation of the basic metal-cutting machine tools (e.g., engine lathe, milling machine, drill press, band saw, cut-off saw, etc.) are demonstrated. The students receive introductory training on the safe operation of these machines as well as on safe practices in the machine shop. Two small projects are completed to demonstrate basic machine shop abilities by the end of the course. Students must successfully complete an online shop safety quiz prior to the first day of the course. Offered spring and fall semesters only.
Section Comments: Class is open to SENIORS and JUNIORS who will be SENIOR in Fall 2024. Fridays 9:10 AM- 12:00 PM 10/18/24 -11/8/24
Equivalent(s): TECH 602A
Only listed colleges in section: Engineering&Physical Sciences
Only listed classes in section: Junior, Senior
Instructors: Brad Kinsey
Start Date End Date Days Time Location
8/26/2024 12/9/2024 F 9:10am - 12:00pm KING S161